Telecommunications Linesworker – ANZSCO 342413

Telecommunications Linesworkers install, maintain, and repair external telecommunication equipment such as aerial lines, conduits and underground cables, radio and mobile phone antennae, and limited items of terminal equipment.

Skill Level

Specialisations

Operator Bearer Systems (Army)

Skills Assessment Requirement

Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.

Skills Assessment authority for Telecommunication Linesworker is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:

Must have successfully completed an AQF Qualification either a Certificate III in Telecommunications Rigging Installation or formal training that is comparable
Must possess skills that are current to Australian industry standards demonstrated by 12 months full time employment or equivalent part-time in the occupation in the previous three years
If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification

Potential Visa Pathways for Telecommunications Linesworker

ANZSCO	Occupation	Skills Assessment	189	190	485	491 (State)	491 (Family)	186 (Direct)	407 (Training)	494 (regional Sponsored)	482 (TSS Short Term)
342413	Telecommunications Linesworker	TRA	x	√	x	√	x	x	√	√	√

Group: 3424 Telecommunications Trades Workers

Description

Install, maintain and repair data transmission equipment, aerial lines, conduits, cables, radio antennae and telecommunications equipment and appliances.

Tasks

Examining drawings, specifications and work areas to determine positioning and connections for equipment to be installed
Locating faults in telecommunications equipment using instruments such as ohmmeters, voltmeters, ammeters and transmission measuring equipment
Attaching wires and cables to appliances
Adjusting, replacing and repairing faulty items, and testing equipment using electronic instruments
Installing cabling for telephone, radio, pay TV and computer transmission
Joining cables and sealing sheaths with lead and thermoplastic
Erecting, testing and maintaining aerial and underground wires and cables, and radio and mobile phone antennae
Installing telecommunications equipment and appliances such as telephones, switchboards and data transmission equipment

Skill Level

Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)

In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)

At least three years of relevant experience and/or relevant vendor certification may substitute for the formal qualifications listed above. In some instances relevant experience may be required in addition to the formal qualification.

Occupations in this Group

342411 Cabler (Data and Telecommunications)
342412 Telecommunications Cable Jointer
342413 Telecommunications Linesworker (Aus) / Telecommunications Line Mechanic (NZ)
342414 Telecommunications Technician

How to calculate your points (skilled visas)

To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.

Points will be given to you based on the following:

Age
Educational Qualifications
Points for Professional Year
Points for NAATI- Credentialled Community Language
Points for 2 Year Study
Points for English
Points for Regional Study
Points for Work Experience
Points for Specialist Educational Qualifications (STEM)
Points for Partner

Click here to calculate your points.

Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa

To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)

While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.

Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.

In summary, to be eligible for 190 visa, you need to meet the following criteria:

Immigration Points

Must score at least 65 points, or higher points if the state or territory requires.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by the state or territory and then apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

To check if the state/ territory government requirements for your occupation, refer to the following links

State/ Territory	Links to requirements
New South Wales	NSW Skilled Migration Nomination Requirement 2021-2022 (190 Visa) NSW Subclass 190 Skilled Occupation list Skilled occupation list for NSW 491 visa NSW Skilled Work Regional visa (subclass 491) requirements NSW 491 Regional Skilled Occupation list (Stream 1) NSW 491 Regional Skilled Occupation list (Stream 2 and 3)
Victoria	Victoria Skilled visa nomination program (190 and 491 visa)
South Australia	South Australia Skilled Migration Program (190 and 491 visa) South Australia’s Skilled occupation list
Western Australia	Western Australia 190 and 491 nomination requirements. Western Australian skilled migration occupation list (WASMOL)
Northern Territory	Northern Territory 190 Visa requirements NT Migration Occupation List
Australian Capital Territory (ACT)	ACT Canberra Small Business Owner Pathway ACT Skilled Migration Nomination Requirements (190 and 491 visa) Canberra Matrix Points Calculator
Tasmania	Tasmania 491 Visa Requirements Tasmanian Skilled Occupations List (TSOL) Tasmania Small Business Owner Stream – 491 visa Tasmania Skilled Migration Nomination Requirements Tasmania 190 Visa Requirements
Queensland	491 visa criteria for Queensland Queensland Skilled Occupation Lists Far North Queensland DAMA 491 Visa – Queensland Small Business Owners Pathway

407 Training Visa

The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.

To be eligible for visa 407, you need to meet the following criteria:

GTE

You must prove that you genuinely stay in Australia for training and will depart when you complete the training.

English Level

Must have Functional English, i.e. IELTS overall 4.5 with no band less than 4, or equivalent.

Age

Must be over 18 years old.

Be Sponsored

You must be sponsored by an approved temporary activities sponsor – Can be an employer or a commonwealth agency

HEALTH INSURANCE

Must hold valid private health insurance.

Health and Character

Must meet health and character requirements.

Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa

You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.

This visa provides pathway to permanent residency through the 191 visa.

Experience

At least 3 years full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian regional employer.

Skills assessment

Must have a positive skills assessment.

Location

Must live and work in regional areas in Australia.

482 SID visa – Skills in Demand visa (Specialist Skills Pathway)

The Subclass 482 SID visa (Specialist Skills Pathway) that requires a sponsorship from an Australian employer. The Specialist Skills stream allows to your live and work in Australia for up to 4 years each time you are granted this visa. You may apply for the Specialist Skills pathway SID 482 visa if you have an occupation on this list, and as long as the employer is willing to sponsor you. The SID 482 visa has a path to permanent residency through the 186 visa.