Boat Builder and Repairer – ANZSCO 399111
Boat Builder and Repairers build, repair, and modify boats.
- Skill Level
- Composite Boat Builder
- Rigger (Boat)
- Wooden Boat Builder
- Yacht Builder
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Boat Builder and Repairer is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Must have successfully completed an AQF Qualification either a Certificate III in Boating Services or formal training that is comparable
- Must possess skills that are current to Australian industry standards demonstrated by 12 months full time employment or equivalent part-time in the occupation in the previous three years
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
Potential Visa Pathways for Boat Builder and Repairer
|ANZSCO||Occupation||Skills Assessment||189||190||485||491 (State)||491 (Family)||186 (Direct)||407 (Training)||494 (regional Sponsored)||482 (TSS Medium Term)|
|399111||Boat Builder and Repairer||TRA||√||√||√||√||√||√||√||√||√|
Group: 3991 Boat Builders and Shipwrights
- Construct, fit out and repair boats and ships.
- Studying plans and specifications, and preparing templates and scale plans for fabrication and cutting of hull sections
- Marking reference points and lines on dry docks and slipways
- Checking position and functioning of slipway apparatus
- Assembling shells of boats and erecting hull sections of ship
- Erecting and preparing launching platforms, conducting pre-launch tests and supervising launching procedures
- Installing masts, frames, decking, fittings, machines, shafts and safety equipment
- Building and installing structures such as cabins, machine mountings, propeller supports and rudders
- Determining repair requirements and procedures
- May make hull moulds and fabricate and repair vessels using materials such as aluminium, wood, glass, reinforced plastics, carbon fibre, Kevlar, fibreglass and concrete
- Skill Level
- In Australia and New Zealand:
Most occupations in this unit group have a level of skill commensurate with the following qualifications:
- Australia (ANZSCO Skill Level 3)
- AQF Certificate III + 2 years of on-the-job training; or
- AQF Certificate IV
- New Zealand (ANZSCO Skill Level 3)
- NZQF Level 4 Qualification
Please note: at least three years of relevant experience may be a substitute for the formal qualifications listed above. In some instances, relevant experience and/or on-the-job training may be required in addition to the formal qualification. This occupation may require registration or licensing.
- Australia (ANZSCO Skill Level 3)
- Occupations in this Group
- 399111 Boat Builder and Repairer
- 399112 Shipwright
How to calculate your points (skilled visas)
To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.
Points will be given to you based on the following:
- Educational Qualifications
- Points for Professional Year
- Points for NAATI- Credentialled Community Language
- Points for 2 Year Study
- Points for English
- Points for Regional Study
- Points for Work Experience
- Points for Specialist Educational Qualifications (STEM)
- Points for Partner
Click here to calculate your points.
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
To check if the state/ territory government requirements for your occupation, refer to the following links
Links to requirements
|New South Wales||
|Australian Capital Territory (ACT)|
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.
Study Pathway to Boat Builder and Repairer
To become a Boat Builder and Repairer, you usually need a certificate II or III in marine craft construction or boating services.
Certificate III in Marine Craft Construction
- Duration: 2 years
- Total Course Cost Approx: $22,000 AUD
- Completion of Australian secondary education or equivalent
- English proficiency requirement – IELTS 5.5 or equivalent
- Must be employed as an apprentice in the Marine Construction industry
- Certificate II in Boating Services
- Certificate III in Automotive and Marine Trimming Technology