Welder (First Class) – ANZSCO 322313
- Welders (First Class) fabricate and repair metal products using various welding techniques.
- Skill Level
- 3
- Specialisations
-
- Special Class Welder
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Welder (First Class) is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Must have successfully completed an AQF Qualification either a Certificate III in Engineering – Fabrication Trade or formal training that is comparable
- Must possess skills that are current to Australian industry standards demonstrated by 3 years full time employment or equivalent part-time in the occupation
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
- If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
Potential Visa Pathways for Welder (First Class)
| ANZSCO | Occupation | Skills Assessment | 189 | 190 | 485 | 491 (State) | 491 (Family) | 186 (Direct) | 407 (Training) | 494 (regional Sponsored) | 482 (TSS Medium Term) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 322313 | Welder (First Class) | TRA | √ | √ | √ | √ | √ | √ | √ | √ | √ |
Group: 3223 Structural Steel and Welding Trades Workers
- Description
- Cut, shape, join and repair metal components of iron and steel structures, boilers, pressure vessels and pipes, ships and other vessels.
- Tasks
-
- Studying blueprints, drawings and specifications to determine job requirements
- Selecting, cleaning and preparing metal stock
- Cutting marked-out metal sections and shapes using hand tools, flame cutting torches and metal cutting machines
- Shaping and bending metal sections and pipes using hand and machine tools, and by heating and hammering
- Aligning parts to be joined using hand tools and measuring instruments
- Joining metal sections using various welding techniques, bolting and riveting
- Examining welds for width of bead, penetration and precision
- Finishing products by cleaning, polishing, filing and bathing in acidic solutions
- Cleaning and smoothing welds by filing, chiselling and grinding
- Skill Level
- Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
- Occupations in this Group
-
- 322311 Metal Fabricator
- 322312 Pressure Welder
- 322313 Welder (First Class) (Aus) / Welder (NZ)
How to calculate your points (skilled visas)
To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.
Points will be given to you based on the following:
- Age
- Educational Qualifications
- Points for Professional Year
- Points for NAATI- Credentialled Community Language
- Points for 2 Year Study
- Points for English
- Points for Regional Study
- Points for Work Experience
- Points for Specialist Educational Qualifications (STEM)
- Points for Partner
Click here to calculate your points.
189 visa – Skilled Independent Visa
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Immigration Points
Must score at least 65 points. Due to the competitive nature of this visa, a pool mark does not guarantee an invitation to apply.
English
Must have at least Competent English, i.e., IELTS 6.0 or equivalent.
Age
Must be under 45 years of age. There is however no age limit for the 189 NZ stream.
be invited
Must lodge the EOI and be invited by the Department of Home Affairs to apply for the visa.
Skills assessment
Must have positive skills assessment. Each occupation has a specific assessing authority.
HEALTH AND CHARACTER
Must meet health and character requirements.
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
Immigration Points
Must score at least 65 points, or higher points if the state or territory requires.
English
Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.
Age
Must be under 45 years of age.
be invited
Must lodge an EOI and be invited by the state or territory and then apply for the visa.
Skills assessment
Must have positive skills assessment. Each occupation has a specific assessing authority.
HEALTH AND CHARACTER
Must meet health and character requirements.
To check if the state/ territory government requirements for your occupation, refer to the following links
State/ Territory |
Links to requirements |
| New South Wales |
|
| Victoria | |
| South Australia | |
| Western Australia | |
| Northern Territory | |
| Australian Capital Territory (ACT) | |
| Tasmania | |
| Queensland |
485 Visa – Graduate Temporary Visa (Graduate Work Stream)
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
Visa History
Must hold a student visa when applying or have held one in the last 6 months.
English Level
Must have at least IELTS 6.0 or equivalent with no band less than 5, or equivalent.
Age
You must be under 50 years of age.
Education
Must have completed a two-year CRISCOS registered course(s).
Skills assessment
Must have positive 485 skills assessment.
Occupation
Your occupation must be on the MLTSSL list.
Subclass 491 Family Sponsored visa – Skilled Work Regional (Provisional) visa
This 491 Family sponsored visa requires you to have a family member who is living in regional area to sponsor you. This visa offers pathway to permanent residency through visa subclass 191.
Immigration Points
Must score at least 65 points, or higher points as it is competitive.
English
Must have at least Competent English, i.e., IELTS 6.0 or equivalent.
Age
Must be under 45 years of age.
be invited
Must lodge an EOI and be invited by DHA to apply for the visa.
Skills assessment
Must have positive skills assessment. Each occupation has a specific assessing authority.
HEALTH AND CHARACTER
Must meet health and character requirements.
Subclass 186 visa – Employer Nomination Scheme
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 2 years under the Temporary Residence Transition stream.
Experience
At least 3-year full-time work experience in the nominated occupation.
English
Must have at least Competent English, i.e., IELTS 6.0 or equivalent.
Be Sponsored
Must be sponsored by an Australian employer.
Skills assessment
Must have a positive skills assessment. Exemptions apply for the 186TRT.
HEALTH AND CHARACTER
Must meet health and character requirements.
407 Training Visa
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
GTE
You must prove that you genuinely stay in Australia for training and will depart when you complete the training.
English Level
Must have Functional English, i.e. IELTS overall 4.5 with no band less than 4, or equivalent.
Age
Must be over 18 years old.
Be Sponsored
You must be sponsored by an approved temporary activities sponsor – Can be an employer or a commonwealth agency
HEALTH INSURANCE
Must hold valid private health insurance.
Health and Character
Must meet health and character requirements.
Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
Experience
At least 3 years full-time work experience in the nominated occupation.
English
Must have at least Competent English, i.e., IELTS 6.0 or equivalent.
Be Sponsored
Must be sponsored by an Australian regional employer.
Skills assessment
Must have a positive skills assessment.
Location
Must live and work in regional areas in Australia.
482 SID visa – Skills In Demand visa- Core Skills Pathway
The 482 SID visa (Core Skills Pathway) visa that requires a sponsorship from an Australian employer. You must be nominated to work in an occupation on the Core Skills Occupation List (CSOL). This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you. The SID 482 visa has a pathway to permanent residency through the 186 transition stream.
Experience
At least 1 years work experience in the nominated occupation.
English Level
Must have IELTS overall of atleast 5.0 with no band less than 5.0.
Age
There is no age requirement for this visa.
Be Sponsored
Must be sponsored by an Australian employer.
Skills assessment
Generally not required unless on this list.
Health and Character
Must meet health and character requirements.
Job Outlook
Study Pathway to Welder (First Class)
To become a Welder (First Class), you need extensive experience, or a certificate III in engineering – fabrication trade to work as a Welder (First Class). This course is often completed as part of an apprenticeship. A welder – first class constructs or repairs metal products by joining parts either manually (using a variety of welding methods, including electric arc, MIG and TIG welding or oxyacetylene welding) or by machine. These parts are used to complete structures and equipment (such as ships, bridges, pipelines, vehicles and domestic appliances).
Course Details
Certificate III in Engineering – Fabrication Trade
- Duration: 1 year to 3 years (full-time)
- Total Course Cost Approx: $11,000 to $17,500 AUD
Requirements
- Age requirement – must be 18 years old or over
- Must have completed Australia Year 10 or 11 or equivalent
- English proficiency requirement – IELTS 5.5 or equivalent
Related Courses
- Certificate IV in Engineering
- Certificate IV in Engineering Drafting
- Certificate IV in Aircraft Surface Finishing
Book a consultation with our Registered Migration Agents in Melbourne to find out more about your visa options and your path to Australian permanent residency or applying for citizenship.
