Electronic Equipment Trades Worker – ANZSCO 342313
- Electronic Trades Workers maintain, adjust and repair electronic equipment such as business machines, video and audio equipment, and electronic instruments and control systems, and transmit and receive radio messages.
- Skill Level
- Audiovisual Technician
- Fire Alarm Technician
- Home Theatre Technician
- Security Technician
- Video Technician
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Electronic Equipment Trades Worker is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Must have successfully completed an AQF Qualification either a Certificate III in Electronics and Communications or Certificate III in Security Equipment or formal training that is comparable
- Must possess skills that are current to Australian industry standards demonstrated by 12 months full time employment or equivalent part-time in the occupation in the previous three years
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experienc
- If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
Potential Visa Pathways for Electronic Equipment Trades Worker
|ANZSCO||Occupation||Skills Assessment||189||190||485||491 (State)||491 (Family)||186 (Direct)||407 (Training)||494 (regional Sponsored)||482 (TSS Medium Term)|
|342313||Electronic Equipment Trades Worker||TRA||√||√||√||√||√||√||√||√||√|
Group: 3423 Electronics Trades Workers
- Maintain, adjust and repair electronic equipment such as business machines, video and audio equipment, and electronic instruments and control systems, and transmit and receive radio messages.
- Examining and testing machines, equipment, instruments and control systems to diagnose faults
- Adjusting, repairing, and replacing worn and defective parts and wiring, and maintaining machines, equipment and instruments
- Reassembling, test operating and adjusting equipment
- Advising users of correct operating procedures to prevent malfunctions
- Receiving messages by interpreting code and converting to plain language, and writing and typing messages for transmission
- Monitoring radio traffic, and transmitting and receiving voice messages
- Installing electronic instruments and control systems
- Applying knowledge of electrical, electronic, mechanical, hydraulic and pneumatic principles in commissioning and maintaining control systems
- Skill Level
- In Australia and New Zealand:
Most occupations in this unit group have a level of skill commensurate with the following qualifications:
- Australia (ANZSCO Skill Level 3)
- AQF Certificate III + 2 years of on-the-job training; or
- AQF Certificate IV
- New Zealand (ANZSCO Skill Level 3)
- NZQF Level 4 Qualification
Please note: at least three years of relevant experience may be a substitute for the formal qualifications listed above. In some instances, relevant experience and/or on-the-job training may be required in addition to the formal qualification. This occupation may require registration or licensing.
- Australia (ANZSCO Skill Level 3)
- Occupations in this Group
- 342311 Business Machine Mechanic
- 342312 Communications Operator
- 342313 Electronic Equipment Trades Worker
- 342314 Electronic Instrument Trades Worker (General)
- 342315 Electronic Instrument Trades Worker (Special Class)
How to calculate your points (skilled visas)
To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.
Points will be given to you based on the following:
- Educational Qualifications
- Points for Professional Year
- Points for NAATI- Credentialled Community Language
- Points for 2 Year Study
- Points for English
- Points for Regional Study
- Points for Work Experience
- Points for Specialist Educational Qualifications (STEM)
- Points for Partner
Click here to calculate your points.
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
To check if the state/ territory government requirements for your occupation, refer to the following links
Links to requirements
|New South Wales||
|Australian Capital Territory (ACT)|
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.
Study Pathway to Electronic Equipment Trades Workers
You can work as an Electronic Equipment Trades Worker without formal qualifications if you are able to demonstrate your technical competency to employers. A certificate III in electronics and communications, computer systems equipment, instrumentation and control or another related field may be helpful.
Certificate III in Electronics and Communications
- Duration: 1.5 years
- Total Course Cost Approx: $18,000 AUD
- Must be 18 years or older
- Completion of Australian Year 12 or equivalent
- English proficiency requirement – IELTS 5.5 overall with no band less than 5.0 or equivalent
- Certificate III in Instrumentation and Control
- Certificate III in Appliance Service