Technical Cable Jointer – ANZSCO 342212
- Technical Cable Jointers join insulated electric power cables installed in underground conduits and trenches and prepares cable terminations for connection to electrical equipment and overhead lines.
- Skill Level
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Technical Cable Jointer is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Must have successfully completed an AQF Qualification either a Certificate III in Electricity Supply Industry – Power Systems – Distribution Cable Jointing or formal training that is comparable
- Must possess skills that are current to Australian industry standards demonstrated by 12 months full time employment or equivalent part-time in the occupation in the previous three years
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
- If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
Potential Visa Pathways for Technical Cable Jointer
|ANZSCO||Occupation||Skills Assessment||189||190||485||491 (State)||491 (Family)||186 (Direct)||407 (Training)||494 (regional Sponsored)||482 (TSS Medium
|342212||Technical Cable Jointer||TRA||√||√||√||√||√||√||√||√||√|
Group: 3422 Electrical Distribution Trades Workers
- Prepare, install, repair, maintain and patrol electric power distribution networks.
- Installing conductors and aerial equipment, and underground cables and equipment
- Installing and maintaining equipment associated with electrical supply such as transformers
- Attending to electrical breakdown and emergencies
- Maintaining poles and associated hardware, and continuity of electrical supply and street lighting
- Conducting routine maintenance on the aerial and underground electricity supply network
- Conducting low-voltage switching operations
- Fitting pole hardware and crossarms
- Preparing low- and high-voltage cable joints and cable terminations while connecting and installing electrical equipment and overhead lines
- Using heavy plant equipment such as elevated work platforms and portable equipment such as hydraulic drills
- May undertake substation installation and maintenance, and specialised testing and revenue meter installation
- Skill Level
- Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Registration or licensing may be required.
- Occupations in this Group
- 342211 Electrical Linesworker (Aus) / Electrical Line Mechanic (NZ)
- 342212 Technical Cable Jointer
How to calculate your points (skilled visas)
To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.
Points will be given to you based on the following:
- Educational Qualifications
- Points for Professional Year
- Points for NAATI- Credentialled Community Language
- Points for 2 Year Study
- Points for English
- Points for Regional Study
- Points for Work Experience
- Points for Specialist Educational Qualifications (STEM)
- Points for Partner
Click here to calculate your points.
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
To check if the state/ territory government requirements for your occupation, refer to the following links
Links to requirements
|New South Wales||
|Australian Capital Territory (ACT)|
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.
Study Pathways to Technical Cable Jointer
Technical Cable Jointers join insulated electric power cables installed in underground conduits and trenches, and prepare cable terminations for connection to electrical equipment and overhead lines. You usually need a certificate III in cable jointing to work as a Technical Cable Jointer. This course is often completed as part of an apprenticeship.
Certificate III in ESI – Power Systems – Distribution Cable Jointing
- Duration: 4 years (part-time study + apprenticeship)
- Total Course Cost Approx: $16,000 AUD
- Completion of Australian secondary education or equivalent
- English proficiency requirement – IELTS 5.5 or equivalent
- Must be employed as an apprentice in the power systems industry. Alternatively, if you do not have an apprenticeship there may be additional entry requirements that apply.
- Certificate III in Telecommunications Technology
- Bachelor of Engineering (Telecommunications)