Electronics Engineer – ANZSCO 233411

Description
Designs, develops, adapts, installs, tests and maintains electronic components, circuits and systems used for computer systems, communication systems, entertainment, transport and other industrial applications. Registration or licensing may be required.
Skill Level
1
Specialisations
  • Communications Engineer (Army)

Skills Assessment Requirement

Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.

Skills Assessment authority for Electronics Engineer is The Institute of Engineers Australia. To have a positive skills assessment, you must meet the following criteria

  • Six pathways for skills assessment by Engineers Australia:
    • Pathway A – If you hold an accredited qualification:
      • 1. Australian qualification pathway if you have studied in Australia and hold a qualification which is accredited by Engineers Australia
      • 2. Washington accord qualification pathway if your qualification is from a country which is a full signatory to the Washington Accord
      • 3. Sydney accord qualification pathway if your qualification is from a county which is a full signatory to the Sydney Accord
      • 4. Dublin accord qualification pathway if your qualification is from a country which is a full signatory to the Dublin Accord
      • 5. You otherwise hold other recognised qualifications
    • Pathway B – Competency Demonstration Report Pathway
      • If you do not hold an accredited qualification or do not want to be assessed according to your degree title or course content
  • Competent English level = IELTS 6
  • For any of the qualification pathways you are required to provide:
    • CV/Resume containing a full summary of your engineering education and work experience
    • Academic degree certificate (a letter of completion will only be accepted as a substitute before graduation and only for Australian qualifications)
    • Complete and official academic transcript (including any recognition of prior learning and course syllabus where applicable)
    • Official English translations of above documents where applicable
  • For the competency demonstration report pathway you are required to provide and prepare:
    • CV/Resume containing a full summary of your engineering education and work experience
    • A reference letter or certificate from your employer on official company letterhead
    • A report containing evidence of continuing professional development, three ‘career episodes’ (each describing a specific aspect of your engineering activity) and a summary statement

Did you know?

When applying under any of the Accord Qualification Pathways Engineers Australia will only consider your qualification if it was obtained the same year or after the country in which you studied became a full Signatory.

You can follow these links for relevant dates and signatory details:

Washington Accord Pathway: follow this link

Sydney Accord Pathway: follow this link

Dublin Accord Pathway: follow this link

Potential Visa Pathways for Electronics Engineer

ANZSCOOccupationSkills Assessment189190485 491 (State)491 (Family)186 (Direct)407 (Training)494 (regional Sponsored)482 (TSS Medium Term)
233411Electronics EngineerEngineers Australia

Group: 2334 Electronics Engineers

Description
design, develop, adapt, install, test and maintain electronic components, circuits and systems used for computer systems, communication systems, entertainment, transport and other industrial applications.
Tasks
  • designing electronic components, circuits and systems used for computer, communication and control systems, and other industrial applications
  • designing software, especially embedded software, to be used within such systems
  • developing apparatus and procedures to test electronic components, circuits and systems
  • supervising installation and commissioning of computer, communication and control systems, and ensuring proper control and protection methods
  • establishing and monitoring performance and safety standards and procedures for operation, modification, maintenance and repair of such systems
  • designing communications bearers based on wired, optical fibre and wireless communication media
  • analysing communications traffic and level of service, and determining the type of installation, location, layout and transmission medium for communication systems
  • designing and developing signal processing algorithms and implementing these through appropriate choice of hardware and software
Skill Level
Most occupations in this unit group have a level of skill commensurate with a bachelor degree or higher qualification. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).

Registration or licensing may be required.

Occupations in this Group
  • 233411 Electronics Engineer
189 visa – Skilled Independent Visa

This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.

In short, to be eligible for visa 189, you need to meet the following criteria:

Immigration Points

Must score at least 65 points. Due to the competitive nature of this visa, a pool mark does not guarantee an invitation to apply.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age. There is however no age limit for the 189 NZ stream.

be invited

Must lodge the EOI and be invited by the Department of Home Affairs to apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa

To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)

While the 190 visa is a permanent visa, subclass 491 visa gives you right to live and work in regional Australia for 5 years with a pathway to permanent residency through the subclass 191 visa.

Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.

In summary, to be eligible for 190 visa, you need to meet the following criteria:

Immigration Points

Must score at least 65 points, or higher points if the state or territory requires.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent, or higher if the state or territory requires.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by the state or territory and then apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.


To check if the state/ territory government requirements for your occupation, refer to the following links

State/ Territory
Links to requirements
New South Wales
Victoria
South Australia
Western Australia
Northern Territory
Australian Capital Territory (ACT)
Tasmania
Queensland

485 Visa – Graduate Temporary Visa (Graduate Work Stream)

The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.

To be eligible for visa 485, you need to meet the following criteria:

Age

You must be under 50 years of age.

Education

Must have completed a two-year CRISCOS registered course(s).

Subclass 491 Family Sponsored visa – Skilled Work Regional (Provisional) visa

This 491 Family sponsored visa requires you to have a family member who is living in regional area to sponsor you. This visa offers pathway to permanent residency through visa subclass 191.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age.

be invited

Must lodge an EOI and be invited by DHA to apply for the visa.

Skills assessment

Must have positive skills assessment. Each occupation has a specific assessing authority.

HEALTH AND CHARACTER

Must meet health and character requirements.

Subclass 186 visa – Employer Nomination Scheme

If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 2 years under the Temporary Residence Transition stream.

Experience

At least 3-year full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian employer.

Skills assessment

Must have a positive skills assessment. Exemptions apply for the 186TRT.

HEALTH AND CHARACTER

Must meet health and character requirements.

407  Training Visa

The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.

To be eligible for visa 407, you need to meet the following criteria:

GTE

You must prove that you genuinely stay in Australia for training and will depart when you complete the training.

English Level

Must have Functional English, i.e. IELTS overall 4.5 with no band less than 4, or equivalent.

Age

Must be over 18 years old.

Be Sponsored

You must be sponsored by an approved temporary activities sponsor – Can be an employer or a commonwealth agency

Health and Character

Must meet health and character requirements.

Subclass 494 visa – Skilled Sponsored Regional (Provisional) visa

You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.

This visa provides pathway to permanent residency through the 191 visa.

Experience

At least 3 years full-time work experience in the nominated occupation.

English

Must have at least Competent English, i.e., IELTS 6.0 or equivalent.

Age

Must be under 45 years of age, unless exempt.

Be Sponsored

Must be sponsored by an Australian regional employer.

482 SID visa – Skills In Demand visa- Core Skills Pathway

The 482 SID visa  (Core Skills Pathway) visa that requires a sponsorship from an Australian employer. You must be nominated to work in an occupation on the Core Skills Occupation List (CSOL). This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you. The SID 482 visa has a pathway to permanent residency through the 186 transition stream.

English Level

Must have IELTS overall of atleast 5.0 with no band less than 5.0.

Age

There is no age requirement for this visa.

Health and Character

Must meet health and character requirements.

Job Outlook

  • $2,502

    Weekly Earnings

  • 89%

    Work full time hours

  • strong

    Growth expected in the next 5 years

  • 6% female

    Gender share

  • 43 hours

    Average full-time

  • high skill

    Skill level rating

Study Pathway to Electronics Engineer

To become an Electronics Engineer, you need a bachelor degree in engineering majoring in electronics or a related field. Postgraduate studies may also be useful. It should be noted that registration may be required in some states and territories. In addition, Engineers Australia has a non-compulsory National Engineering Register.

Bachelor of Electrical and Electronic Engineering (Honours)

  • Duration: 4 years
  • Total Course Cost Approx: $164,737 AUD
  • Completion of Australian Year 12 or equivalent
  • English proficiency requirement – IELTS 6.0 overall with no band below 6.0
  • Bachelor of Engineering (Honours) (Electrical and Electronic)
  • Master of Engineering

Book a consultation with our Registered Migration Agents in Melbourne to find out more about your visa options and your path to Australian permanent residency or applying for citizenship.