Motor Mechanic (General) – ANZSCO 321211
- Motor Mechanic (General) maintains, tests, and repairs petrol engines and the mechanical parts of lightweight motor vehicles such as transmissions, steering and brakes.
- Skill Level
- Alternative Titles
- Automotive Light Mechanic
- Automatic Transmission Mechanic
- Automotive Airconditioning Mechanic
- Brake Mechanic
- Ground Support Equipment Fitter (Air Force)
- Roadside Mechanic
- Vehicle Mechanic (Army)
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Motor Mechanic (General) is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Must have successfully completed an AQF Qualification either a Certificate III in Light Vehicle Mechanical Technology or formal training that is comparable
- Must possess skills that are current to Australian industry standards demonstrated by 12 months full time employment or equivalent part-time in the occupation in the previous three years
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
- If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
Potential Visa Pathways for Motor Mechanic (General)
|ANZSCO||Occupation||Skills Assessment||189||190||485||491 (State)||491 (Family)||186 (Direct)||407 (Training)||494 (regional Sponsored)||482 (TSS Medium
|321211||Motor Mechanic (General)||TRA||√||√||√||√||√||√||√||√||√|
Group: 3212 Motor Mechanics
- Repair, maintain and test motor vehicle and other internal combustion engines and related mechanical components.
Motor Vehicle Parts and Accessories Fitters are excluded from this unit group. Motor Vehicle Parts and Accessories Fitters are included in Unit Group 8994 Motor Vehicle Parts and Accessories Fitters.
- Detecting and diagnosing mechanical and electrical faults in engines and parts
- Dismantling and removing engine assemblies, transmissions, steering mechanisms and other components, and checking parts
- Repairing and replacing worn and defective parts and reassembling mechanical components, and referring to service manuals as needed
- Performing scheduled maintenance services, such as oil changes, lubrications and engine tune-ups, to achieve smoother running of vehicles and ensure compliance with pollution regulations
- Reassembling engines and parts after being repaired
- Testing and adjusting mechanical parts after being repaired for proper performance
- Diagnosing and testing parts with the assistance of computers
- May inspect vehicles and issue roadworthiness certificates or detail work required to achieve roadworthiness
- May respond to vehicle breakdown service calls
- Skill Level
- Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Registration or licensing may be required.
- Occupations in this Group
- 321211 Motor Mechanic (General)
- 321212 Diesel Motor Mechanic
- 321213 Motorcycle Mechanic
- 321214 Small Engine Mechanic
How to calculate your points (skilled visas)
To apply for a skilled visa, you need to know how many points you can score. The minimum score to be eligible for application is 65 points. However, depending on your occupation, the competitiveness, and the states you are applying to, you might need to score more points to get an invite.
Points will be given to you based on the following:
- Educational Qualifications
- Points for Professional Year
- Points for NAATI- Credentialled Community Language
- Points for 2 Year Study
- Points for English
- Points for Regional Study
- Points for Work Experience
- Points for Specialist Educational Qualifications (STEM)
- Points for Partner
Click here to calculate your points.
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
To check if the state/ territory government requirements for your occupation, refer to the following links
Links to requirements
|New South Wales||
|Australian Capital Territory (ACT)|
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.
Study Pathway to Motor Mechanic (General)
To become a Motor Mechanic (General) extensive experience or an apprenticeship is usually required. It should be noted that registration with the relevant state or territory board may be required. You may also need:
- Driver’s license
- Psychometric or aptitude testing
Certificate III in Light Vehicle Mechanical Technology
- Duration: 1 year
- Total Course Cost Approx: $17,860 AUD
- Must be at least 18 years of age
- English proficiency requirement – IELTS 5.5 with no band less than 5.0
- Completion of Australian Year 10 or equivalent
- Certificate III in Mobile Plant Technology
- Certificate II in Automotive Servicing Technology
- Certificate III in Outdoor Power Equipment Technology