Glazier – ANZSCO 333111
- Measures, cuts, finishes, fits and installs flat glass and mirrors.
- Skill Level
- Glass Beveller
- Glass Embosser
- Glass Etcher
- Glass Silverer
Skills Assessment Requirement
Unless you are exempt in very limited circumstances, you are required to have a positive Skills Assessment to apply for the visas listed above.
Skills Assessment authority for Glazier is Trades Recognition Australia (TRA). To have a positive skills assessment, you must meet the following criteria:
- Three Programs for skills assessment with TRA.
- Program A- Offshore Skills Assessment (OSAP)
- If your passport is on this OSAP Nominated Occupation and Country list next to your occupation, you must apply through OSAP. If your passport is not on this list, apply through Program B or C.
- OSAP Pathway 1– for applicants who do not hold an Australian qualification in their trade but hold a qualification which is equivalent to an AQF cert
- OSAP Pathway 2 – for applicants who hold:
- a relevant Australian qualification, or
- a current identified Australian occupational licence
- To be eligible to apply for the skills assessment program, you must be able to show you have completed full-time paid employment in your nominated occupation, or an occupation that is directly related to your nominated occupation.
- Program B Migration Skills Assessment
- You must have a qualification directly related to your nominated occupation (i.e. Cert III in Glass and Glazing) or at least 3 years of relevant experience
- If you have obtained a qualification internationally or an Australian qualification that was not through the Australian Recognition of Learning process, you are required to demonstrate 3 years full time or equivalent post-qualification experience
- If you have obtained an Australian qualification issued through the Australian Recognition of Learning process, you are required to demonstrate 3 years full-time or equivalent post-qualification experience OR 6 years full-time or equivalent experience which can be either pre- or post-qualification
- Pathway B- Temporary Skills Shortage Skills Assessment
- For applicants who require a skills assessment to apply for the Temporary Skill Shortage visa (subclass 482)
- Program A- Offshore Skills Assessment (OSAP)
Did you know?
As part of the OSAP program you will be required to participate in a technical assessment of your skills and knowledge. This will be conducted by a qualified assessor who will also be a qualified tradesperson in your nominated occupation.
Potential Visa Pathway for Glaziers
|ANZSCO||Occupation||Skills Assessment||189||190||485||491 (State)||491 (Family)||186 (Direct)||407 (Training)||494 (regional Sponsored)||482 (TSS Medium Term)|
Group: 3331 Glaziers
- measure, cut, finish, fit and install flat glass and mirrors.
- determining type and dimensions of glass required
- laying glass over patterns on padded tables and in jigs
- measuring and marking glass for cutting
- examining glass and marking defective areas
- cutting along patterns and templates
- breaking off sheets and excess glass with notched tools and glass pliers
- installing glass and mirrors in windows, skylights, display cases, interior walls and ceilings
- smoothing rough edges using belt sanders and smoothing wheels
- may coat, cut, etch, trim and treat glass to achieve special effects
- Skill Level
- Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
- Occupations in this Group
- 333111 Glazier
This 189 visa allows you to live, work and study in Australia permanently. It is a points-tested visa. The minimum score to apply is 65 points. However, based on previous invitation rounds, you would need to achieve a higher score to have a better chance of obtaining an invitation.
In short, to be eligible for visa 189, you need to meet the following criteria:
Subclass 190 visa– Skilled Nominated Visa & Subclass 491 visa – Skilled Work Regional (Provisional) Visa
To apply for visa subclass 190 and visa subclass 491, you need to have a nomination from the state/territory government where you want to live and work. Each State and Territory have individual requirements that must be met in order to receive nomination. (See below)
Another difference between the 190 and 491 visa is that you can only apply for visa subclass 491 if you are living and working in regional areas in Australia, while it is not a requirement if you are applying for the 190 visa.
In summary, to be eligible for 190 visa, you need to meet the following criteria:
To check if the state/ territory government requirements for your occupation, refer to the following links
Links to requirements
|New South Wales||
|Australian Capital Territory (ACT)|
The 485 visa is a work visa available to international students who have completed two years of study in Australia. It is an 18-month visa that has full work rights and full study rights. It also allows you to travel freely to and from Australia throughout the validity of the visa.
To be eligible for visa 485, you need to meet the following criteria:
If you have an employer who is willing to sponsor you, you may be eligible for a Subclass 186 visa. This visa is permanent and will allow you to live, work and study in Australia indefinitely. To be eligible for this visa, you need to have at least 3 years of working experience in your nominated occupation and a positive skills assessment. Alternatively, if you are a holder of a Subclass 457 or TSS visa, you can apply for Subclass 186 after working for your employer for at least 3 years under the Temporary Residence Transition stream.
The 407 visa a short stay visa for individuals to participate in occupational training or professional development in Australia. This visa is generally valid to stay in Australia for 2 years. Please note this visa is subject to condition 8102 which forbids work apart from the training that is specified in the visa application. You are also required to maintain health insurance whilst in Australia.
To be eligible for visa 407, you need to meet the following criteria:
You can apply for subclass 494 if you have a regional employer who is willing to sponsor you. To be eligible for this visa, you must have at least 3 years of working experience in your nominated occupation and have a relevant skills assessment. With this visa, there is a requirement that you must work for the employer who is sponsoring you.
This visa provides pathway to permanent residency through the 191 visa.
The Subclass 482 visa is a Temporary Skill Shortage visa that requires a sponsorship from an Australian employer. This visa allows to your live and work in Australia for up to 4 years. You may apply for as many 482 visas as you want, as long as the employer is willing to sponsor you.
Study Pathway to Glazier
You can work as a Glazier without formal qualifications if you are able to demonstrate your technical competency to employers. However, a certificate III in glass and glazing is usually required. This course if often completed as part of an apprenticeship.
Certificate III in Glass and Glazing
- Duration: 1 year
- Total Course Cost Approx: $16,129 AUD
- No formal entry requirements for this course
- Apprenticeship Course – All students must have an employer and a valid Apprenticeship Contract prior to commencing
- Certificate III in Automotive Glazing Technology